√ Cara Mengatasi Masalah Mic di Phoenix OS | Error & Noise - Teknolalat

Find Us OIn Facebook

Cara Mengatasi Mic Error Phoenix OS
Cara mengatasi mic Phoenix OS error dan noise - Halo sobat, pada artikel ini saya akan membagikan cara untuk mengatasi mic error pada Phoenix OS. Mic pada Phoenix OS bisanya mengeluarkan suara noise yang menggangu atau bahkan mic tidak berfungsi sama sekali.

Bagi Anda yang bermain game khususnya PUBG Mobile menggunakan headphone atau headset tentu memerlukan mic untuk berkomunikasi dengan tim, namun karena suara mic noise atau berisik di Phoenix OS tentu akan menganggu teman satu tim.

Bahan

- FX File Explorer
Link : Apkpure
- File Explorer (Root Add-On)
Link : Apkpure

Cara Mengatasi Mic Error di Phoenix OS

Berikut dua cara mengatasi mic error di Phoenix OS semua versi khususnya Phoenix OS 3.5.1, 3.6.1, ROC dan berbagai versi lainnya.

Langkah 1: Silahkan download FX File Explorer dan instal seperti biasa.

Langkah 2: Masuk ke System (Root) → System → Etc.

Langkah 3: Buka file Init.sh dengan FX Text Editor.

Langkah 4: Cari atau scroll kebawah pada alsa_amixer, kemudian ubah value berikut.

alsa_amixer -c $c set 'Mic Boost' 3 → Ganti angka 3 menjadi 0, 0.1, 0.2 dan seterusnya.
alsa_amixer -c $c set 'Internal Mic Boost' 3 → Ganti angka 3 menjadi 00.10.2 dan seterusnya.

Langkah 5: Terakhir silahkan restart Phoenix OS Anda.

Cara Kedua

Silahkan copy semua kode init.sh berikut dan replace pada file init.sh Anda dan restart Phoenix OS.

#
# Copyright (C) 2013-2015 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#

function set_property()
{
 setprop "$1" "$2"
 [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}

function set_prop_if_empty()
{
 [ -z "$(getprop $1)" ] && set_property "$1" "$2"
}


function init_misc()
{
 # device information
 # CHAOZHUO BEGIN
 ######################## manufacturer #############################
 #cz_manufacturer=
 #if [ -f /data/system/chaozhuo/cz_manufacturer ]; then
 # cz_manufacturer=`cat /data/system/chaozhuo/cz_manufacturer`
 # if [ -n "$cz_manufacturer" ]; then
 #  setprop ro.product.manufacturer "$cz_manufacturer"
 # else
 #  setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 # fi
 #else
 # setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 #fi

 ######################## model #############################
 #cz_model=
 #if [ -f /data/system/chaozhuo/cz_model ]; then
 # cz_model=`cat /data/system/chaozhuo/cz_model`
 # if [ -n "cz_model" ]; then
 #  setprop ro.product.model "$cz_model"
 # else
 #  setprop ro.product.model "$PRODUCT"
 # fi
 #else
 # setprop ro.product.model "$PRODUCT"
 #fi

 ######################## brand #############################
 #cz_brand=
 #if [ -f /data/system/chaozhuo/cz_brand ]; then
 # cz_brand=`cat /data/system/chaozhuo/cz_brand`
 # if [ -n "cz_brand" ]; then
 #  setprop ro.product.brand "cz_brand"
 # else
 #  # setprop ro.product.brand "$(cat $DMIPATH/sys_vendor)"
 # fi
 #else
  # setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 #fi
 #setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 #setprop ro.product.model "$PRODUCT"

 #if [ ! -s /data/system/chaozhuo/cz_model ]; then
 # setprop ro.product.model "$PRODUCT"
 #else
 # cz_model=`cat /data/system/chaozhuo/cz_model`
 # if [ ! -n "$cz_model" ]; then
 #  setprop ro.product.model "$PRODUCT"
 # fi
 #fi

 #if [ ! -s /data/system/chaozhuo/cz_manufacturer ]; then
 # setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 #else
 # cz_manufacturer=`cat /data/system/chaozhuo/cz_manufacturer`
 # if [ ! -n "$cz_manufacturer" ]; then
 #  setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 # fi
 #fi

 # CHAOZHUO END

 #setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
 #setprop ro.product.model "$PRODUCT"

 # a hack for USB modem
 lsusb | grep 1a8d:1000 && eject

 # in case no cpu governor driver autoloads
 [ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
}

function init_hal_audio()
{
 case "$PRODUCT" in
  VirtualBox*|Bochs*)
   [ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
   ;;
  *)
   ;;
 esac

 if grep -qi "IntelHDMI" /proc/asound/card0/id; then
  [ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
 fi
}

function init_hal_wifi()
{
# BCM WiFi driver conflict start.
# Broadcom BCM4311 (PCI IDs 14e4:4311, 14e4:4312)
# Broadcom BCM4312 (PCI ID 14e4:4315)
# Broadcom BCM4313 (PCI ID 14e4:4727)
# Broadcom BCM4321 (PCI IDs 14e4:4328, 14e4:4329, 14e4:432a)
# Broadcom BCM4322 (PCI IDs 14e4:432b, 14e4:432c, 14e4:432d)
# Broadcom BCM43224 (PCI IDs 14e4:0576, 14e4:4353)
# Broadcom BCM43225 (PCI ID 14e4:4357)
# Broadcom BCM43227 (PCI ID 14e4:4358)
# Broadcom BCM43228 (PCI ID 14e4:4359)
# Broadcom BCM43142 (PCI ID 14e4:4365)
# Broadcom BCM4331 (PCI ID 14e4:4331)
# Broadcom BCM4352 (PCI ID 14e4:43b1)
# Broadcom BCM4360 (PCI IDs 14e4:43a0, 14e4:4360)

BCMAID=`lspci | grep "14e4" | awk '{print $4}'`

case "${BCMAID##*:}" in
 4311 | 4312 | \
  4315 | \
  4727 | \
  4328 | 4329 | 432a | \
  432b | 432c | 432d | \
  0576 | 4353 | \
  4357 | 4358 | 4359 | \
  4365 | \
  4331 | \
  43b1 | \
  43a0 | 4360 )

  rmmod b43
  rmmod b44
  rmmod b43legacy
  rmmod ssb
  rmmod bcma
  rmmod brcm80211
  rmmod wl

  modprobe wl
  ;;
 *)
  ;;
esac
# BCM WiFi driver conflict end.

# BCM SDIO WiFi driver config file start.
BCMSDIO=`dmesg | grep brcmfmac | grep txt`
if [ "$BCMSDIO" != "" ]; then 
    BCMNAME=`echo $BCMSDIO | awk '{print $9}'`
    mount -t efivarfs none /sys/firmware/efi/efivars
    cp /sys/firmware/efi/efivars/nvram-74b00bd9-805a-4d61-b51f-43268123d113 /lib/firmware/$BCMNAME
    set_property phoenixos.brcmfmac 1
fi
# BCM SDIO WiFi driver config file end.
}

function init_hal_bluetooth()
{
 for r in /sys/class/rfkill/*; do
  type=$(cat $r/type)
  [ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
 done

 case "$PRODUCT" in
  T10*TA|HP*Omni*)
   BTUART_PORT=/dev/ttyS1
   set_property hal.bluetooth.uart.proto bcm
   ;;
  MacBookPro8*)
   rmmod b43
   modprobe b43 btcoex=0
   modprobe btusb
   ;;
  *)
   for bt in $(busybox lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
    chown 1002.1002 $bt && chmod 660 $bt
   done
   ;;
 esac

 if [ -n "$BTUART_PORT" ]; then
  set_property hal.bluetooth.uart $BTUART_PORT
  chown bluetooth.bluetooth $BTUART_PORT
  start btattach
 fi

 # rtl8723bs bluetooth
 if dmesg -t | grep -qE '8723bs.*BT'; then
  TTYSTRING=`dmesg -t | grep -E 'tty.*MMIO' | awk '{print $2}' | head -1`
  if [ -n "$TTYSTRING" ]; then
   echo "RTL8723BS BT uses $TTYSTRING for Bluetooth."
   ln -sf $TTYSTRING /dev/rtk_h5
   start rtk_hciattach
  fi
 fi
}

function init_hal_camera()
{
 return
}

function init_hal_gps()
{
 # TODO
 return
}

function set_drm_mode()
{
 case "$PRODUCT" in
  ET1602*)
   drm_mode=1366x768
   ;;
  VMware*)
   [ -n "$video" ] && drm_mode=$video
   ;;
  *)
   ;;
 esac

 [ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode
}

function init_uvesafb()
{
 case "$PRODUCT" in
  ET2002*)
   UVESA_MODE=${UVESA_MODE:-1600x900}
   ;;
  *)
   ;;
 esac

 modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}

function init_hal_gralloc()
{
 case "$(cat /proc/fb | head -1)" in
  *virtiodrmfb)
      if [ "$HWACCEL" != "0" ]; then
    set_property ro.hardware.hwcomposer drm
    set_property ro.hardware.gralloc gbm
      fi
    set_prop_if_empty sleep.state none
      ;;
  0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
      if [ "$HWACCEL" != "0" ]; then
    set_property ro.hardware.gralloc drm
    set_drm_mode
      fi
      ;;
  "")
      init_uvesafb
      ;&
  0*)
      ;;
 esac

 [ -n "$DEBUG" ] && set_property debug.egl.trace error
}

function init_hal_hwcomposer()
{
 # TODO
 return
}

function init_hal_lights()
{
 chown 1000.1000 /sys/class/backlight/*/brightness
}

function init_hal_power()
{
 for p in /sys/class/rtc/*; do
  echo disabled > $p/device/power/wakeup
 done

 # TODO
 case "$PRODUCT" in
  HP*Omni*|OEMB|Surface*3|T10*TA)
   set_prop_if_empty sleep.state none
   ;;
  *)
   ;;
 esac
}

function init_hal_sensors()
{
 # if we have sensor module for our hardware, use it
 ro_hardware=$(getprop ro.hardware)
 [ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0

 local hal_sensors=kbd
 local has_sensors=true
 case "$(cat $DMIPATH/uevent)" in
  *Lucid-MWE*)
   set_property ro.ignore_atkbd 1
   hal_sensors=hdaps
   ;;
  *ICONIA*W5*)
   hal_sensors=w500
   ;;
  *S10-3t*)
   hal_sensors=s103t
   ;;
  *Inagua*)
   #setkeycodes 0x62 29
   #setkeycodes 0x74 56
   set_property ro.ignore_atkbd 1
   set_property hal.sensors.kbd.type 2
   ;;
  *TEGA*|*2010:svnIntel:*)
   set_property ro.ignore_atkbd 1
   set_property hal.sensors.kbd.type 1
   io_switch 0x0 0x1
   setkeycodes 0x6d 125
   ;;
  *DLI*)
   set_property ro.ignore_atkbd 1
   set_property hal.sensors.kbd.type 1
   setkeycodes 0x64 1
   setkeycodes 0x65 172
   setkeycodes 0x66 120
   setkeycodes 0x67 116
   setkeycodes 0x68 114
   setkeycodes 0x69 115
   setkeycodes 0x6c 114
   setkeycodes 0x6d 115
   ;;
  *tx2*)
   setkeycodes 0xb1 138
   setkeycodes 0x8a 152
   set_property hal.sensors.kbd.type 6
   set_property poweroff.doubleclick 0
   set_property qemu.hw.mainkeys 1
   ;;
  *MS-N0E1*)
   set_property ro.ignore_atkbd 1
   set_property poweroff.doubleclick 0
   setkeycodes 0xa5 125
   setkeycodes 0xa7 1
   setkeycodes 0xe3 142
   ;;
  *Aspire1*25*)
   modprobe lis3lv02d_i2c
   echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
   ;;
  *ThinkPad*Tablet*)
   modprobe hdaps
   hal_sensors=hdaps
   ;;
  *i7Stylus*|*S10T*)
   set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
   [ -z "$(getprop sleep.state)" ] && set_property sleep.state none
   ;;
  *ST70416-6*)
   set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
   ;;
  *ONDATablet*)
   set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
   ;;
  *ASUSFlipTP412*)
                        set_property hal.sensors.iio.accel.matrix 0,1,0,-1,0,0,-1,0,0
   ;;
  *)
   has_sensors=false
   ;;
 esac

 # has iio sensor-hub?
 if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
  busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
  lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
 elif lsmod | grep -q lis3lv02d_i2c; then
  hal_sensors=hdaps
 fi

 # TODO close Surface Pro 4 sensor until bugfix
 case "$(cat $DMIPATH/uevent)" in
  *SurfacePro4*)
   hal_sensors=kbd
   ;;
  *)
   ;;
 esac

 set_property ro.hardware.sensors $hal_sensors
 [ "$hal_sensors" != "kbd" ] && has_sensors=true
 set_property config.override_forced_orient $has_sensors
}

function create_pointercal()
{
 if [ ! -e /data/misc/tscal/pointercal ]; then
  mkdir -p /data/misc/tscal
  touch /data/misc/tscal/pointercal
  chown 1000.1000 /data/misc/tscal /data/misc/tscal/*
  chmod 775 /data/misc/tscal
  chmod 664 /data/misc/tscal/pointercal
 fi
}

function init_tscal()
{
 case "$PRODUCT" in
  ST70416-6*)
   modprobe gslx680_ts_acpi
   ;&
  T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
   create_pointercal
   return
   ;;
  *)
   ;;
 esac

 for usbts in $(lsusb | awk '{ print $6 }'); do
  case "$usbts" in
   0596:0001|0eef:0001)
    create_pointercal
    return
    ;;
   *)
    ;;
  esac
 done
}

function init_ril()
{
 case "$(cat $DMIPATH/uevent)" in
  *TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
   set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
   set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
   set_property ro.radio.noril no
   ;;
  *)
   set_property ro.radio.noril yes
   ;;
 esac
}

function init_cpu_governor()
{
 governor=$(getprop cpu.governor)

 [ $governor ] && {
  for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do
   echo $governor > $cpu/cpufreq/scaling_governor || return 1
  done
 }
}

function phoenixos_compat()
{
    PHOENIX_LOG=/data/system/phoenixos.log
    PHOENIX_LOG1=/data/system/phoenixos1.log
    PHOENIX_TEMP=/data/system/tmp
    PHOENIX_DISK=`cat /data/system/phoenixlog.addr`
    PHOENIX_COMPAT_BIN=/system/xbin/phoenix_compat

    if [ -f /data/system/phoenixlog.dir ]; then 
        PHOENIX_DIR=`cat /data/system/phoenixlog.dir`
    else
        PHOENIX_DIR=PhoenixOS
    fi

    if [ $1 = "cmdline" ]; then
        sed -i '5s/^.*$/boot: cmdline/' $PHOENIX_LOG
    else
        if [ $1 = "android" ]; then
            sed -i '5s/^.*$/boot: android/' $PHOENIX_LOG
        else
            sed -i '5s/^.*$/boot: phoenixos/' $PHOENIX_LOG
        fi

        $PHOENIX_COMPAT_BIN $1
        cp -f $PHOENIX_LOG1 $PHOENIX_LOG
    fi

    mount $PHOENIX_DISK $PHOENIX_TEMP
    cp -f $PHOENIX_LOG $PHOENIX_TEMP/$PHOENIX_DIR
    umount $PHOENIX_TEMP
}

function do_init()
{
    phoenixos_compat cmdline

 init_misc
 init_hal_audio
 init_hal_wifi
 init_hal_bluetooth
 init_hal_camera
 init_hal_gps
 init_hal_gralloc
 init_hal_hwcomposer
 init_hal_lights
 init_hal_power
 init_hal_sensors
 init_tscal
 init_ril
 post_init
}

function do_netconsole()
{
 modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"
}

function do_bootanim()
{
    phoenixos_compat android

    [ -n "$(getprop phoenixos.brcmfmac)" ] && rmmod brcmfmac && modprobe brcmfmac
}

function do_bootcomplete()
{
    phoenixos_compat phoenixos

 init_cpu_governor

 [ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3

 lsmod | grep -Ehq "brcmfmac|rtl8723be" && setprop wlan.no-unload-driver 1

 case "$PRODUCT" in
  1866???|1867???|1869???) # ThinkPad X41 Tablet
   start tablet-mode
   start wacom-input
   setkeycodes 0x6d 115
   setkeycodes 0x6e 114
   setkeycodes 0x69 28
   setkeycodes 0x6b 158
   setkeycodes 0x68 172
   setkeycodes 0x6c 127
   setkeycodes 0x67 217
   ;;
  6363???|6364???|6366???) # ThinkPad X60 Tablet
   ;&
  7762???|7763???|7767???) # ThinkPad X61 Tablet
   start tablet-mode
   start wacom-input
   setkeycodes 0x6d 115
   setkeycodes 0x6e 114
   setkeycodes 0x69 28
   setkeycodes 0x6b 158
   setkeycodes 0x68 172
   setkeycodes 0x6c 127
   setkeycodes 0x67 217
   ;;
  7448???|7449???|7450???|7453???) # ThinkPad X200 Tablet
   start tablet-mode
   start wacom-input
   setkeycodes 0xe012 158
   setkeycodes 0x66 172
   setkeycodes 0x6b 127
   ;;
  *)
   ;;
 esac

# [ -d /proc/asound/card0 ] || modprobe snd-dummy
 for c in $(grep '\[.*\]' /proc/asound/cards | awk '{print $1}'); do
  f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state
  if [ -e $f ]; then
   alsa_ctl -f $f restore $c
   alsa_amixer -c $c set Speaker 50%
  else
   alsa_ctl init $c
   alsa_amixer -c $c set Master on
   alsa_amixer -c $c set Master 100%
   alsa_amixer -c $c set Headphone on
   alsa_amixer -c $c set Headphone 100%
   alsa_amixer -c $c set Speaker 100%
   alsa_amixer -c $c set Capture 80%
   alsa_amixer -c $c set Capture cap
   alsa_amixer -c $c set PCM 100 unmute
   alsa_amixer -c $c set SPO unmute
   alsa_amixer -c $c set IEC958 on
   alsa_amixer -c $c set 'Mic Boost' 0
   alsa_amixer -c $c set 'Internal Mic Boost' 0
   alsa_amixer -c $c set Line on
   alsa_amixer -c $c set Line 100%
   alsa_amixer -c $c set 'Line Boost' 1
   alsa_amixer -c $c set 'Front Mic' on
   alsa_amixer -c $c set 'Front Mic' 100%
   alsa_amixer -c $c set 'Front Mic Boost' 0
   alsa_amixer -c $c set 'Rear Mic' on
   alsa_amixer -c $c set 'Rear Mic' 100%
   alsa_amixer -c $c set 'Rear Mic Boost' 1
   alsa_amixer -c $c set 'Input Source',0 'Rear Mic'
   alsa_amixer -c $c set 'Inverted Internal Mic' on
   alsa_amixer -c $c set 'Inverted Internal Mic' 100%
   alsa_amixer -c $c set 'Inverted Internal Mic Boost' 0
   alsa_amixer -c $c cset name='Mic Capture Switch' on
   alsa_amixer -c $c cset name='Internal Mic Capture Switch' on
   alsa_amixer -c $c cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c $c cset name='Internal Mic Switch' on
   alsa_amixer -c $c cset name='Headset Mic Switch' off
   alsa_amixer -c $c cset name='ADC Capture Switch' on
   alsa_amixer -c $c cset name='Stereo ADC MIXL ADC2 Switch' on
   alsa_amixer -c $c cset name='Stereo ADC MIXR ADC2 Switch' on
   alsa_amixer -c sset Mic on
   alsa_amixer -c sset Mic 100%
   alsa_amixer -c sset 'Mic Boost' 1
   alsa_amixer -c sset 'Internal Mic' on
   alsa_amixer -c sset 'Internal Mic' 100%
   alsa_amixer -c sset 'Internal Mic Boost' 1
   alsa_amixer -c sset Capture 80%
   alsa_amixer -c sset Capture cap
   alsa_amixer -c sset 'Front Mic' on
   alsa_amixer -c sset 'Front Mic' 100%
   alsa_amixer -c sset 'Front Mic Boost' 1
   alsa_amixer -c sset 'Rear Mic' on
   alsa_amixer -c sset 'Rear Mic' 100%
   alsa_amixer -c sset 'Rear Mic Boost' 1
   alsa_amixer -c sset Line on
   alsa_amixer -c sset Line 100%
   alsa_amixer -c sset 'Line Boost' 1
   alsa_amixer -c sset 'Input Source',0 'Rear Mic'
   alsa_amixer -c sset 'Inverted Internal Mic' on
   alsa_amixer -c sset 'Inverted Internal Mic' 100%
   alsa_amixer -c sset 'Inverted Internal Mic Boost' 1
   alsa_amixer -c cset name='Mic Capture Switch' on
   alsa_amixer -c cset name='Internal Mic Capture Switch' on
   alsa_amixer -c cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c cset name='Internal Mic Switch' off
   alsa_amixer -c cset name='Headset Mic Switch' off
   alsa_amixer -c cset name='ADC Capture Switch' on
   alsa_amixer -c cset name='Stereo ADC MIXL ADC2 Switch' on
   alsa_amixer -c cset name='Stereo ADC MIXR ADC2 Switch' on
   alsa_amixer -c0 $c set Mic on
   alsa_amixer -c0 $c set Mic 100%
   alsa_amixer -c0 $c set 'Mic Boost' 0
   alsa_amixer -c0 $c set Capture 80%
   alsa_amixer -c0 $c set Capture cap
   alsa_amixer -c0 $c set 'Front Mic' on
   alsa_amixer -c0 $c set 'Front Mic' 100%
   alsa_amixer -c0 $c set 'Front Mic Boost' 0
   alsa_amixer -c0 $c set 'Rear Mic' on
   alsa_amixer -c0 $c set 'Rear Mic' 100%
   alsa_amixer -c0 $c set 'Rear Mic Boost' 0
   alsa_amixer -c0 $c set Line on
   alsa_amixer -c0 $c set Line 100%
   alsa_amixer -c0 $c set 'Line Boost' 0
   alsa_amixer -c0 $c set 'Input Source',0 'Rear Mic'
   alsa_amixer -c0 $c set 'Internal Mic Boost' 0
   alsa_amixer -c0 $c set 'Inverted Internal Mic' on
   alsa_amixer -c0 $c set 'Inverted Internal Mic' 100%
   alsa_amixer -c0 $c cset name='Mic Capture Switch' on
   alsa_amixer -c0 $c cset name='Internal Mic Capture Switch' on
   alsa_amixer -c0 $c cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c0 sset Mic on
   alsa_amixer -c0 sset Mic 100%
   alsa_amixer -c0 sset 'Mic Boost' 1
   alsa_amixer -c0 sset 'Internal Mic' on
   alsa_amixer -c0 sset 'Internal Mic' 100%
   alsa_amixer -c0 sset 'Internal Mic Boost' 1
   alsa_amixer -c0 sset 'Inverted Internal Mic' on
   alsa_amixer -c0 sset 'Inverted Internal Mic' 100%
   alsa_amixer -c0 sset 'Inverted Internal Mic Boost' 1
   alsa_amixer -c0 cset name='Mic Capture Switch' on
   alsa_amixer -c0 cset name='Internal Mic Capture Switch' on
   alsa_amixer -c0 cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c1 $c set Mic on
   alsa_amixer -c1 $c set Mic 100%
   alsa_amixer -c1 $c set 'Mic Boost' 1
   alsa_amixer -c1 $c set 'Internal Mic' on
   alsa_amixer -c1 $c set 'Internal Mic' 100%
   alsa_amixer -c1 $c set Capture 80%
   alsa_amixer -c1 $c set Capture cap
   alsa_amixer -c1 $c set 'Front Mic' on
   alsa_amixer -c1 $c set 'Front Mic' 100%
   alsa_amixer -c1 $c set 'Front Mic Boost' 0
   alsa_amixer -c1 $c set 'Rear Mic' on
   alsa_amixer -c1 $c set 'Rear Mic' 100%
   alsa_amixer -c1 $c set 'Rear Mic Boost' 0
   alsa_amixer -c1 $c set Line on
   alsa_amixer -c1 $c set Line 100%
   alsa_amixer -c1 $c set 'Line Boost' 0
   alsa_amixer -c1 $c set 'Input Source',0 'Rear Mic'
   alsa_amixer -c1 $c set 'Internal Mic Boost' 0
   alsa_amixer -c1 $c set 'Inverted Internal Mic' on
   alsa_amixer -c1 $c set 'Inverted Internal Mic' 100%
   alsa_amixer -c1 $c set 'Inverted Internal Mic Boost' 0
   alsa_amixer -c1 $c cset name='Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Internal Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Internal Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c1 $c cset name='Internal Mic Switch' off
   alsa_amixer -c1 $c cset name='Headset Mic Switch' off
   alsa_amixer -c1 $c cset name='ADC Capture Switch' on
   alsa_amixer -c1 $c cset name='Stereo ADC MIXL ADC2 Switch' on
   alsa_amixer -c1 $c cset name='Stereo ADC MIXR ADC2 Switch' on
   alsa_amixer -c1 set Mic on
   alsa_amixer -c1 set Mic 100%
   alsa_amixer -c1 set 'Mic Boost' 1
   alsa_amixer -c1 set 'Internal Mic' on
   alsa_amixer -c1 set 'Internal Mic' 100%
   alsa_amixer -c1 set 'Internal Mic Boost' 1
   alsa_amixer -c1 set 'Inverted Internal Mic' on
   alsa_amixer -c1 set 'Inverted Internal Mic' 100%
   alsa_amixer -c1 set 'Inverted Internal Mic Boost' 1
   alsa_amixer -c1 sset Mic on
   alsa_amixer -c1 sset Mic 100%
   alsa_amixer -c1 sset 'Mic Boost' 1
   alsa_amixer -c1 sset 'Internal Mic' on
   alsa_amixer -c1 sset 'Internal Mic' 100%
   alsa_amixer -c1 sset 'Internal Mic Boost' 1
   alsa_amixer -c1 sset Capture 80%
   alsa_amixer -c1 sset Capture cap
   alsa_amixer -c1 sset 'Front Mic' on
   alsa_amixer -c1 sset 'Front Mic' 100%
   alsa_amixer -c1 sset 'Front Mic Boost' 1
   alsa_amixer -c1 sset 'Rear Mic' on
   alsa_amixer -c1 sset 'Rear Mic' 100%
   alsa_amixer -c1 sset 'Rear Mic Boost' 1
   alsa_amixer -c1 sset Line on
   alsa_amixer -c1 sset Line 100%
   alsa_amixer -c1 sset 'Line Boost' 1
   alsa_amixer -c1 sset 'Input Source',0 'Rear Mic'
   alsa_amixer -c1 sset 'Inverted Internal Mic' on
   alsa_amixer -c1 sset 'Inverted Internal Mic' 100%
   alsa_amixer -c1 sset 'Inverted Internal Mic Boost' 1
   alsa_amixer -c1 cset name='Mic Capture Switch' on
   alsa_amixer -c1 cset name='Internal Mic Capture Switch' on
   alsa_amixer -c1 cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c1 cset name='Mic Capture Switch' on
   alsa_amixer -c1 cset name='Internal Mic Capture Switch' on
   alsa_amixer -c1 cset name='Inverted Internal Mic Capture Switch' on
   alsa_amixer -c1 cset name='Internal Mic Switch' off
   alsa_amixer -c1 cset name='Headset Mic Switch' off
   alsa_amixer -c1 cset name='ADC Capture Switch' on
   alsa_amixer -c1 cset name='Stereo ADC MIXL ADC2 Switch' on
   alsa_amixer -c1 cset name='Stereo ADC MIXR ADC2 Switch' on
   # heaphones - (c) plbossart
   alsa_amixer -c $c cset name='DAC MIXL INF1 Switch'  off
   alsa_amixer -c $c cset name='DAC MIXR INF1 Switch'  off
   alsa_amixer -c $c cset name='Stereo DAC MIXL DAC L1 Switch'  on
   alsa_amixer -c $c cset name='Stereo DAC MIXR DAC R1 Switch'  on
   alsa_amixer -c $c cset name='Stereo DAC MIXL DAC L2 Switch'  on
   alsa_amixer -c $c cset name='Stereo DAC MIXR DAC R2 Switch'  on
   alsa_amixer -c $c cset name='HPO MIX HPVOL Switch'  on
   alsa_amixer -c $c cset name='Headphone Switch'  off
   alsa_amixer -c $c cset name='HP Channel Switch' off
   alsa_amixer -c $c cset name='Speaker Switch' off
   alsa_amixer -c $c cset name='HP L Playback Switch' on
   alsa_amixer -c $c cset name='HP R Playback Switch' on
   alsa_amixer -c $c cset name='HP Playback Volume' 20
   alsa_amixer -c $c1 cset name='DAC MIXL INF1 Switch'  on
   alsa_amixer -c $c1 cset name='DAC MIXR INF1 Switch'  on
   alsa_amixer -c $c1 cset name='Stereo DAC MIXL DAC L1 Switch'  on
   alsa_amixer -c $c1 cset name='Stereo DAC MIXR DAC R1 Switch'  on
   alsa_amixer -c $c1 cset name='Stereo DAC MIXL DAC L2 Switch'  on
   alsa_amixer -c $c1 cset name='Stereo DAC MIXR DAC R2 Switch'  on
   alsa_amixer -c $c1 cset name='HPO MIX HPVOL Switch'  off
   alsa_amixer -c $c1 cset name='Headphone Switch'  off
   alsa_amixer -c $c1 cset name='HP Channel Switch' off
   alsa_amixer -c $c1 cset name='Speaker Switch' off
   alsa_amixer -c $c1 cset name='HP L Playback Switch' on
   alsa_amixer -c $c1 cset name='HP R Playback Switch' on
   alsa_amixer -c $c1 cset name='HP Playback Volume' 20
  fi
 done

 case "$(cat $DMIPATH/uevent)" in
  *S10T*)
   alsa_amixer -c 0 set Speaker 95%
   ;;
  *)
   ;;
 esac

 post_bootcomplete
}

PATH=/sbin:/system/bin:/system/xbin

DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
PRODUCT=$(cat $DMIPATH/product_name)

# import cmdline variables
for c in `cat /proc/cmdline`; do
 case $c in
  BOOT_IMAGE=*|iso-scan/*|*.*=*)
   ;;
  *=*)
   eval $c
   if [ -z "$1" ]; then
    case $c in
     DEBUG=*)
      [ -n "$DEBUG" ] && set_property debug.logcat 1
      ;;
    esac
   fi
   ;;
 esac
done

[ -n "$DEBUG" ] && set -x || exec &> /dev/null

# import the vendor specific script
hw_sh=/vendor/etc/init.sh
[ -e $hw_sh ] && source $hw_sh

case "$1" in
 netconsole)
  [ -n "$DEBUG" ] && do_netconsole
        phoenixos_compat
  ;;
 bootcomplete)
  do_bootcomplete
  ;;
 bootanim)
  do_bootanim
  ;;
 init|"")
  do_init
  ;;
esac
return 0

Penutup

Nah itu tadi cara mengatasi masalah mic pada Phoenix OS, bagaimana mudah bukan?. Apabila Anda mengalami masalah untuk fix mic Phoenix OS silahkan komen dibawah. Sekian artikel singkat ini, selamat mencoba dan semoga bermanfaat.
Load Comments
Lebih baru Lebih lama